FDC2125 | Allen Bradley Series C F Frame

Eaton Cutler-Hammer FDC2125

Image Coming Soon

DO Supply, Inc. sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with DO Supply, Inc. and not the manufacturer. DO Supply, Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. Read more

Some of the products sold by DO Supply, Inc. may come with firmware installed on them. DO Supply, Inc. makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. DO Supply, Inc. makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, DO Supply, Inc. does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by DO Supply, Inc. requires software for operation, you acknowledge that DO Supply, Inc. does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less

Basic Details

MPN	FDC2125
Product Line	Series C F Frame
Manufacturer	Eaton Cutler-Hammer

DO Supply is NOT an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty.

Product Description

The FDC2125 is a drive by Rockwell-Automation.

Fast Worldwide Delivery

We offer international delivery through FedEx, UPS, and DHL.

One-Year Warranty

We are proud to offer a one-year DO Supply Warranty with all purchases.

Payment Methods

We are happy to accept payment through all major credit card providers.

Technical Specifications

Frame	F
Interrupting Capacity	3 pounds
Part Number/Catalog No.	FDC2125
Pole(s)	2
Product Type	Molded Case Circuit Breaker

Series	C
Trip Amps	200 kA at 240 Volts
Trip Unit	2.75 x 6 x 3.38 inches
Weight	Thermal-Magnetic

About the FDC2125

The Cutler-Hammer FDC2125 is a 2-pole molded case circuit breaker made by Cutler-Hammer (a division of the Eaton Corporation). This is a thermal-magnetic circuit breaker. The FDC2125 incorporates elements that are engineered to sense the excessive heat resulting from a current overload condition and also to sense the high current that will occur during a short circuit. This module delivers perfect protection to the equipment and operators when it is used for applications connected to voltages lower than 600 Volts AC or 250 Volts DC. Both the magnetic and thermal trips are not adjustable or interchangeable. Although it is not flexible when it comes to trip adjustments, this device will compensate by offering an interrupting rating of 200 kAIC at 240 Volts AC and one of 100 kAIC at 480 Volts AC.

The device has an F-frame housing. The Eaton FDC2125 can conduct 125 Amps of current in the normal operating state (calibrated at 40 degrees Celsius). Its tripping current is influenced by the surrounding air temperature, and users should factor that fact in when selecting a protection device for electrical circuits. In addition, this circuit breaker has a “push-to-trip” button. On the front of the FDC2125, the handle can move between 3 possible states: “on”, “off”, or “trip”. If an overcurrent or short-circuit is sensed by the device, the handle will go to the “trip” position, and the power will not be delivered to the load side of the module anymore. In this way, devices positioned behind this MCCB are protected. The weight of this item is 2 pounds (0.91 kilograms). The product is CSA and UL listed.

Common Misspellings

Manufacturer Part Numbers (MPNs) are often difficult to read. Here are some commonly mistaken versions for the FDC2125:

FDC212S

FDC2I25

FDC2I2S

DO Supply sells used surplus products. DO Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by DO Supply come with DO Supply’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.