FD3175 | Allen Bradley Series C F Frame

Eaton Cutler-Hammer FD3175

Image Coming Soon

DO Supply, Inc. sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with DO Supply, Inc. and not the manufacturer. DO Supply, Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. Read more

Some of the products sold by DO Supply, Inc. may come with firmware installed on them. DO Supply, Inc. makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. DO Supply, Inc. makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, DO Supply, Inc. does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by DO Supply, Inc. requires software for operation, you acknowledge that DO Supply, Inc. does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less

Basic Details

MPN	FD3175
Product Line	Series C F Frame
Manufacturer	Eaton Cutler-Hammer

DO Supply is NOT an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty.

Product Description

The FD3175 is a drive.

Fast Worldwide Delivery

We offer international delivery through FedEx, UPS, and DHL.

One-Year Warranty

We are proud to offer a one-year DO Supply Warranty with all purchases.

Payment Methods

We are happy to accept payment through all major credit card providers.

Technical Specifications

Frame	F
Interrupting Capacity	4.5 lb
Part Number/Catalog No.	FD3175
Pole(s)	3
Product Type	Molded Case Circuit Breaker

Series	C
Trip Amps	35 kA @ 277V
Trip Unit	4.13 x 6 x 3.38 in.
Weight	Thermal-Magnetic

About the FD3175

The FD3175 is a fixed thermal-magnetic trip type circuit breaker from Eaton Cutler-Hammer. The circuit breaker has its interrupt capped at 35 kAIC at a voltage of 480 Volts AC, and 65 kAIC at 240 Volts AC. the FD3175 is of the FD family and it has an F-frame type. The FD3175 is housed in a molded case which is factory-sealed, eliminating the need for field-installed internal components. The maximum operating voltage it can take when protecting systems using a DC power source is 250 Volts DC, and it is 600 Volts AC when used to protect systems drawing power from an AC power source. The FD3175 Westinghouse molded case circuit breaker has 3 poles, its maximum operating current is calibrated at 175 Amps (maximum) and it belongs to the Cutler-Hammer Series C of molded case circuit breakers.

In addition to measuring 4.9 x 5 x 7.4 inches, the FD3175 has a net weight of 4 pounds. The circuit breaker can be mounted on either a panel or a DIN rail. When mounting the FD3175 on a panel board, only load-end support mounting holes are required. Having an F-frame type, the dead front cover should be cut out to correct escutcheon dimensions. When mounting the FD3175, after following all pre-mounting procedures (inspecting the circuit breaker), position the circuit breaker on the mounting surface then install mounting screws, nuts, and washers. Tighten the screws, taking care not to exceed the rated torque of 3.16 N-m. Note that power should be connected when all the mounting is complete to avoid injury to personnel and damage to other devices in the system.

Common Misspellings

Manufacturer Part Numbers (MPNs) are often difficult to read. Here are some commonly mistaken versions for the FD3175:

FD317S

FD3I75

FD3I7S

DO Supply sells used surplus products. DO Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by DO Supply come with DO Supply’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.